Image
Top
Menú
January 13, 2014

HD2000 power amplifier

High Dynamic Professional Power Amplifier

The HD2000 is a Class H amplifier with 1000 + 1000 W @ Stereo 4Ω power output in a 19’’/2U format, ideal for use in fixed installations.
HD2000 incorporates the soft-start circuit with gradual volume increase, clip limiters and special protection features such as temperature control, overcurrent, DC output and anti-short circuit on the outputs.
The whole HD series is based on our proven High Dynamic Power technology, which means higher efficiency in the ratio of power output versus energy consumed.

Gallery
Specifications

TECHNICAL FEATURES

Voltage Gain 32 dB
Input Sensitivity 1.74 V
Input Impedance 20 kΩ
Slew Rate +/-12 V/μs
Output Power (1 kHz – 0,1% THD) (1)
Stereo 8 Ω 600 + 600 W
Stereo 4 Ω 1000 + 1000 W
Stereo 2 Ω 1500 + 1500 W (2)
Bridge 8 Ω 2000 W
Bridge 4 Ω 3000 W (2)
Average Current draw (1/3 power) (3) 5 A @ 230 V AC
Frequency Response 20 Hz – 20 kHz (0/-1 dB)
Damping Factor (1 kHz @ 8 Ω) 350
Crosstalk 65 dB
S/N Ratio (A-weighted) 105 dB (A)
Mains 220 – 240 V AC- 50/60 Hz
Dimensions (HxWxD) 88 x 482 x 440 mm
Weight 18 kg

(1) Continuous burst tone 20 ms (0 dB) / 480 ms (-20 dB) in accordance with EIA RS-490 and IEC 60268-3(IHF A-202)
(2) Driving the amplifier at 2 Ω channel / 4 Ω bridge at full power mode in poor ventilation conditions may cause a thermal overload protection. 2 Ω power is time limited by mains circuit breaker.
(3) Heavy duty musical program

Support

RELATED PRODUCTS

JK26_relatedJK26

JK10_relatedJK10

JK12_relatedJK12

JK15_relatedJK15

JK12W_relatedJK12W

KEY8_relatedKEY8

JK10_relatedJK10

KEY12_relatedKEY12

KEY15_relatedKEY15

downloads

Submit a Comment

three × five =